The Perkins air filter CF21251 is the core component that ensures clean engine intake. It adopts a "progressive filtration" design and achieves precise interception through three layers of differentiated filter materials. The outer layer is made of coarse polyester fiber mesh, which can block large particle impurities such as gravel and insects; The middle layer is made of ultra-fine melt blown cotton, which has excellent filtration efficiency for dust particles of 0.5-3 μ m; The inner layer adopts a honeycomb structure composite filter paper, which can capture smaller suspended particles. The three layers work together to form a three-dimensional protective net, effectively reducing the wear of the engine cylinder block and piston.
The filter material is subjected to nanoscale electrostatic treatment to enhance its ability to capture fine particles through electrostatic adsorption, without relying on high-density materials to increase wind resistance. While ensuring the filtration effect, the intake resistance is reduced by 15%, ensuring smooth engine suction and avoiding power loss. The frame is made of oil resistant rubber material and treated with a special vulcanization process to maintain elasticity in temperature fluctuations ranging from -35 ℃ to 130 ℃. It fits tightly with the filter cartridge housing, preventing unfiltered air from infiltrating, and is suitable for complex environments such as dusty construction sites and high humidity coastal areas.
This filter is compatible with Perkins 400 series and 900 series engines, including mainstream models such as 404D-22T and 904D-27TG, and is widely used in the intake system of agricultural machinery and small generator sets. The installation adopts a fast rotating fixed structure. Align the filter element with the housing and rotate it 1/4 turn to tighten it, which is easier to operate than traditional buckle design. It can be replaced by a single person within 30 seconds, especially suitable for emergency replacement in outdoor toolless scenarios.
In terms of durability, the pleated filter material adopts an uneven arrangement design, which increases the effective filtration area by 20% and increases the dust holding capacity by 25% compared to the standard filter element. Under normal working conditions, the replacement cycle can be extended to more than 600 hours, reducing maintenance frequency. The surface is treated with anti oil mist, which can resist the adhesion of oil and gas carried in the intake, avoid filter material blockage, and maintain long-term stable breathability.
1706EA-E93TA，1706D-E93TA，2206D-E13TA，2406J-E13TA，2406EA-E13TA，2606JE13TA，402D-05402J-05，403F-07，403J-07，403D-07，403J-11，403J-11T，403EA-11，403EA-11T，403D-11，403F-15，403D-15，403D-15T，403J-17，403J-17T，403EA-17，403J-E17T，404J-E22T，404J-E22TA，404EA-22，404EA-22T，404D-22，404D-22T，404D-22TA，904J-E28T，904J-E28TA，904D-E28T，904J-E36TA，904J-E36TA，904EA-E36TA，904D-E36TA，904D-E36TA，103D-33，1103D-33TA，1103C33T，1104D-44，1104D-44T，1104D-44TA，1104D-E44T，1104D-E44TA，1104C-44，1104C-44T，1104C-44TA，1104A-44，1104A-44T，1106D-70TA，1106D-E70TA，1106C70TA，1204J-E44TA，1204EA-E44TA，1204J-E44TTA，1204EA-E44TTA，1206J-E70TA，1206EA-E70TA，1206J-E70TA，1206J-E70TTA，1206EA-E70TTA，1706J-E93TA，1706EA-E93TA，1706D-E93TA，2206D-E13TA，2406J-E13TA，2406EA-E13TA，2506JE15TA，2506EA-E15TA，2506D-E15TA，2606J-E13TA，2806J-E18TA，2806EA-E18TA，2806J-E18TTA，2806D-E18TA，806D-E18TA
